9
Fitting the Cartridge and Symmetrex Tonearm adjustments
1. We recommend fitting the cartridge with the tone arm in position. However it is possible to fit the
cartridge before suspending the tone arm (see Fig 14). Great care needs to be taken when installing
the cartridge as the Well Tempered Lab bears no responsibility for cartridge damage.
Fig (14)
2. Install the cartridge to the manufacturer’s specifications. The Amadeus MK II features a head shell
that requires no tracking alignment adjustment. We strongly recommend it remains firmly fixed in the
correct position as supplied.
3. The Amadeus MK II Symmetrex tonearm has an effective length of 10.5” (267 mm). The headshell
is fixed ex-factory in the optimum position. There is no provision for over-hang adjustment. Some
alignment protractors may well disagree. However, The Well Tempered Lab stands by their
convictions.
Important: There is absolutely no reason to torque headshell/cartridge mounting hardware to
excess. Cartridge mounting hardware only requires firm but gentle tightening. Heavy handed
torquing of mounting hardware can result in movement of the Amadeus headshell (refer to
www.welltemperedlab.net
on tracking geometry).
4. There is an optional finger lift provided which can be attached to the cartridge fixing screw,
adjacent to the right hand side of the plinth.
5. Apply enough damping fluid so as that no more than one third of the golf ball is submerged in fluid.
See Fig (15).
Note: Damping can be altered by simply raising or lowering the damping cup, it is not critical and
maybe adjusted to suit the listener’s own preference.
6. Set tracking force with stylus gauge, supplied to cartridge manufacturer’s specification.
7. To set tracking force, two counterweights are supplied to enable correct tracking force to be
applied to cartridges of various weights. We recommend choice of counterweight (s) that allow
correct tracking force to be obtained with weight (s) as close to the tonearm lead out cable as
practicable. This is not
critical but care needs to be taken as to not damage tone-arm lead out cable
when attaching counterweights to tone-arm.
8. Adjust tonearm for correct VTA by set screw on suspension pillar.
(17 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern